how to reset led strip lights

How To Reset LED Strip Lights

Are you looking to reset your LED strip lights? You may be starting with them and need some help getting them set up, or something has gone wrong with your existing light setup.

Either way, resetting LED strip lights can be tricky for those unfamiliar with the process – but fear not!

In this blog post, we’ll lead you step-by-step through how to properly reset your RGB or single-color LED strips so that they function at peak performance. Read on to learn everything you need to know about resetting your lighting system and getting it up and running like new again!

What To Do If LED Lights Are Not Working

The pain of LED strip lights that won’t work can be confirmed. It could be that the lights have been damaged or an issue with the controller. What can you do to try and fix the problem?

These are the several steps you should take first:

  • Check the power supply and voltage. Ensure everything is plugged in correctly and that your primary power source is connected and functioning.
  • Check the connections between your controller and the strips to ensure that all the wires are secure.
  • Ensure that the RGB strip controller is set to the correct mode.
  • Check for any signs of overheating or damage to your LED strip lights, as this could be the cause of the issue.
  • If you’re using a remote controller, ensure the correct frequency is set.

You can also decide to reset the LED strip lights. Resetting means you’ll have to start setting them up again, but it can help fix any errors or issues that a power surge or incorrect setup might have caused.

Interesting Read: 8 Best Rope Lights

How to Reset Led Strip Lights

how to reset led strip lights

Resetting LED strip lights is a fairly straightforward process and can be done in the following steps:

Step 1: Power up the LED Strip Light

The first step is to power up the LED strip light. Make sure that the lights are correctly connected and powered on.

Step 2: Find the Reset Button

The next step is to locate the reset button. Depending on your LED strip light, this will be found on the controller or power source.

Step 3: Unplug the Power Source

how to reset led strip lights

Once you’ve found the reset button, it’s time to unplug the power source from your LED strips. This will allow you to press the reset button without fear of an electric shock. While unplugging it from the power source, the strip lights should be off.

Step 4: Press the Reset Button

To reset your LED strips, press the reset button for a few seconds. This will reset the settings of the strip lights and return them to their factory settings.

Step 5: Reconnect the Power Source

Once you’ve held the reset button for a few seconds, you can reconnect the power source and turn on the LED strip lights. Your LED strips should now be reset to their factory settings, allowing you to start the setup process from scratch again.

Interesting Read: How To Connect LED Lights To Alexa

What To Do if the Reset Doesn’t Work

There may be chances that the reset doesn’t work. If this happens, they are other solutions you can try.

1. Find New Batteries

Perhaps the LED strip lights’ batteries need to be replaced. Try finding new ones and replacing the old ones. The best type of battery to use is lithium-ion.

2. Connect the Strip To a New Controller

It may be time to upgrade if you’re using an older controller. Connect your LED lights to a new controller, which could help resolve the issue.

3. Check the Cables and Connectors

Look for any loose connections or frayed cables. Make sure that the power adapter and controller are correctly connected.

4. Replace Shorted Out or Damaged LED Strips

If you find any shorted-out or a damaged light strip, it may be necessary to replace it. You can purchase new LED strips from most hardware stores.

Interesting Read: The Best LED Candelabra Bulbs

Tips for Keeping Your Led Strip Lights Working Properly

how to reset led strip lights

To properly maintain and care for your LED strip lights, here are some tips that can help:

  • Clean the LED Strip Lights Regularly

Make sure you clean your LED strip lights regularly with a soft cloth or brush. This will help remove any buildup of dust, dirt, and debris that can accumulate over time and affect their performance.

  • Check the Connections

Periodically check all the connections between your LED strip lights and the controller. Ensure all the wires are secure and there is no corrosion or rust.

  • Check for any Signs of Damage

If you notice any signs of damage, such as fraying or cracking, to the LED strip lights, you should replace them immediately. This will help prevent any further issues from occurring.

  • Store Your LED Strip Lights Properly

It would be best to store your LED strip lights in a cool and dry place when not in use. This will help protect them from any damage and prolong their lifespan.

Why Are My Led Strips Lights Not Changing?

When you install LED strip lights around your home, the ability to change the colors, flash, and fade is one of the biggest perks. It can be confusing and frustrating if you’ve purchased a product that doesn’t seem to live up to expectations. However, with a few steps, you can figure out the LED strip lights are not changing.

Interesting Read: The Best Waterproof LED Strip Lights

  • First, check if a power source is connected correctly to the strips. The connection point should also have an appropriate voltage for optimal performance. Make sure that all control settings are correctly adjusted and functioning properly, as, in some models, this will prevent color alteration until everything is set correctly.
  • Additionally, ensure that you’re using a suitable controller or remote and not just relying on traditional wall switches or dimmers – this could explain why they don’t seem to change color.

If you are having difficulties with your LED strip lights not changing, try troubleshooting the issue on your own or find an experienced professional to assist in diagnosing and resolving the problem.


Can Led Strip Lights Be Dimmed?

Yes, LED strip lights can be dimmed; many come with dimmer and remote control to adjust the brightness or color.

Do Led Strip Lights Need a Transformer?

Yes, LED strip lights usually need a transformer to convert from the mains voltage to a lower voltage that is safe for use with LED strip lights.


LED strip lights can be a great way to add color and personality to your home or office. However, if you’re having trouble getting them to work correctly, these tips can help you troubleshoot the issue.